Thursday, September 5, 2019

Effects of the Tourism Sector on Employment Rates

Effects of the Tourism Sector on Employment Rates Chapter 2: Literature Review The main purpose of this chapter is to provide an overview of the existing literatures that various researchers have conducted on tourism and employment. This chapter also shed lights on how tourism sector is important for employment. 2.1 Theoretical Review The theoretical literature explores all the theories based on tourism and employment. 2.2 Introduction Around the world tourism has become the most crucial and fast growing industry as it is bringing a numerous advantages especially in Small Island like Mauritius. Over the last decades, tourism has attained increasing recognition as a crucial sector with enormous potential for generating employment. Tourism has been classified as the prosperous industry and considered as one of the largest and most progressive industries in the world that can bring maximum advantage to a country as compared to other economic activities. There has been a rise in tourist’s arrivals during the recent years since the beginning of civilisation as travel has been a great interest for people especially in Mauritius. UNWTOs Tourism 2020 vision foresees that international tourists arrivals are expected to be over 1.56 billion in the year 2020 thus this will bring a positive impact in job opportunities in the future as it will boost up the employment rate in the world. As such, the tourism sector will co ntinue to be a promising industry in the following decades. In a country such as Mauritius, employment is considered as one of the most important matters as unemployment keep on increasing every day. Unemployment following a period of seasonal job creation may be voluntary or involuntary. It is more efficient in creating employment in tourism than in any other sector as tourism is a labour intensive industry. Consumption expenditures of tourist provide direct or indirect employment opportunities in the tourism industry. Therefore total employment in a country is influenced by tourism via the general employment effect in the economy. The rapid growth of international tourism has led to numerous job creations. Tourism can create employment directly through hotels, restaurants, souvenir sales, taxis and nightclubs, and indirectly through the supply of commodities needed by tourism-related businesses. 2.3 The seasonality in tourism employment Tourism seasonality is an important issue in many destinations. Seasonality creates the variation in tourists and visitor numbers to a destination. Many countries are affected by seasonal employment in their tourism industry especially in coastal destination. Seasonality is considered more as an issue rather than a benefit of tourism (Butler, 2001). Thus seasonality is seen as a problem to be tackled at an operational level. Flognfedt (2001) disagrees that in certain situation seasonality in demands present opportunities to rural destinations mostly where their economy balances tourism alongside other activities. However it is considered that seasonality can cause problems for employment level in the economy. Unemploymentis not certainly produced by seasonal employment. Unemployment that occurs due to seasonal employment may be willingly or unwillingly because some employees prefer seasonal job as they are paid more compared to other job. Anyunemployment benefitpolicy designed to alleviate the seasonal nature of employment insectorssuch astourism may reduce the unemployment issue. Employment in the tourism sector is greatly affected by the phenomenon of seasonality. Marshall (1999) describes seasonal job as: â€Å"once the seasonal peak has been over, non-stable job will end at a stated time or in the future†. The perception of tourism seasonality can be described as temporal lack of balance in the phenomenon of tourism which can be signified in their expenditure, in the number of visitors and employment (Butler, 1994). The tourism sector gives the opportunity of complementary earning for local population in many developed and developing countries. However, particularly in many developed country destination seasonal fluctuation brings an irregular use of potential workforce which eventually lead to an increase in seasonal unemployment. The seasonal fluctuation of capacity use in tourism industry brings also a local shift of working area. Several countries reported efforts to prolong the high season by creating new artisanal products in order to attract more tourists in the whole year. This would solve the problem of seasonality employment as well as help to increase the investment yield. Furthermore in the Mauritian context, seasonality in tourist arrivals is also presented and hence this creates an imbalance of employment in the tourism industry where many people will be unemployed during this period. Usually the hottest months of the year are January and December where many foreigners come in Mauritius to spend Christmas and New Year in the summer season while other peaks are in the months of March and August where most of the European spends their holidays in Mauritius. However in June, the winter month in Mauritius and February, the cyclone prone month the country experienced a decreased in its tourist’s arrivals. According to the World Tourism Organization (UNWTO), there has been an increased in international tourist arrivals by 4 percent between the month of January and August 2012 compared with the year in 2011. Furthermore, total expenditure on tourism has also increased and most of the rise in spending was from travellers from developing countries suc h as China, and Indonesia. This generates more employment opportunities in the tourism industry. 2.4 The relationship between Tourism and Employment As tourism is a service industry it has powerful effect on those areas which has surplus of labour because skilled and productive human resources are very important for this sector. Tourism, due to its manpower intensive production by nature, is an industry creating an enormous opportunity of employment facilities. It has a great impact on local population employment. Thus there is a positive relationship between the growth of tourism and the increasing employment benefits. This also helps in reducing the poverty rate. A large number of professional and unprofessional people are required in the field of construction, advertisement and management of infrastructural facilities of tourist centres. The proper utilization of these available human resources could be a benefit for tourism improvement and side by side further prediction of employment. Any expenditure by a tourist allows this industry directly and allows other sectors which supply input to tourism sector indirectly to boost up employment opportunities. Tourism sector is directly linked with several industries such as accommodation, transport, entertainment, travel agents, management, finance and health. Moreover, tourism construction industry provides sources for other industries such as agriculture industry and manufacture industry indirectly. Furthermore, tourism may create job opportunities not only in tourist receiving countries but also in tourist sending countries in different aspect because different service units are needed in sender countries to complete some facilities done before travel. Depending upon development in tourism sector and intensity in demand for tourism there is an increasing effect in employment. The employment in a country increases as much as tourism demands for that country. Tourism creates employment as much as the income (Holloway, 1994). In addition, if we make comparison of employment rates created by tourism based on tourist sender country and tourist receiver country, it is possible to conclude in general that the employment rate in tourist receiver country is higher. Tourism appeared to be more labour intensive and empirical studies have confirmed that the level of employment in tourism activities is quite high. 2.5 Tourism creates an abundance of employment opportunities in both the informal and formal sectors. Tourism creates three types of employment in regional and national economies.( Mathieson and Wall) Direct Employment Tourism creates enormous number of direct employment in establishment like hotels, restaurants, tourist shops, travel agencies and also in transport, handloom and handicraft industries in the country and it meets touristic needs directly. It also generates certain category of workers like interpreters, guides, tour operators and so on. Indirect Employment Those directly employed in the tourism industry creates indirect employment in certain other sectors through their demand for the commodities. It covers the employment in other industries which do not cater for touristic consumers directly but get revenue from expenditure done in touristic relations that is the other sectors which bring input for tourism sector. For example, the workers to be employed in construction work of an additional unit to increase capacity of an accommodation facility, or the employees working in a manufacturing facility, which produces the goods to be put up for sale in this facility, can be considered in indirect employment. Induced Employment It refers to further employment in economy arising from re-spending of the income which has been acquired by direct and indirect employment approaches ( Mathieson and Wall, 1982). The individuals, whose earnings and standard of living have raised due to their tourism activities, create new job opportunities spending this acquired earning in other sectors of the economy. Multiplier effect of tourism plays an essential role in the development of induced employment. Mauritius has not been able to maintain its number one position in the regional rankings as it was overtaken by the entry of the Seychelles in the year 2013 and is ranked 58th overall. The priority of the sector remains high, along with a strong national attraction for Travel Tourism (ranked 6th). The country’s tourism sector and the good infrastructural development ground were ranked 48th and 37th respectively by regional standards. Travel Tourism is one of the dominant employment creators in the earth as this industry directly engages more than 98 million people, representing over 3 percent of employment rate in the world. The sector contributes to around one in every eleven jobs in the whole world. The share of world employment in Travel Tourism is greater than that for the auto manufacturing industries and chemicals manufacturing industries combined, across each and every region of the world. In addition, the outlook for the sector is almost positive as job growth in Travel Tourism is estimated to average 1.9 percent yearly over the following next ten years, compared with 1.2 percent growth yearly forecast for total jobs in the world. In all the regions of the world except for Africa, employment in Travel Tourism is foreseen to be more promising than total employment growth while travel and tourism employment in Africa is still expected to grow by 2.3 percent yearly for the next decades and reach 2.9 percent of total employment by 2022. Empirical literature review This section provides a brief description of the relevant empirical studies on tourism and employment. The main findings have been recorded, merged and compared where appropriate to build a model for analysing the impact of tourism on employment. Finally, the relationship between tourism and employment is examined. As tourism is a mixture of sectors and it consists of a great number of small service sectors, it becomes difficult to calculate exactly the tourism’s contribution in the country’s economy. However in Albania country it has been able to determine the relationship between tourism and employment in Albania during the year 1999 to 2012 and the empirical studies show that tourism has a positive impact on employment. Time series have quarterly data and their study has been done using Engle Granger test, Johansen Co integration and the correction of error. Thus empiric results show that tourism has had a positive effect on employment and the co-integration test has given result that there is a strong relationship between the two variables in the long run period. Furthermore, in Bermuda (dix 1989) concluded that 70 % of all employment in the island is supported by tourism. However when solely the direct employment is viewed the impact of tourism on employment is undervalued. That is real impact is far greater when taking into consideration the effect on the economy of both indirect and induced employment. A lack of accurate figure for total number of people employed in either indirect or induced tourism activities makes it difficult to calculate how many people are affected even though it is possible to estimate the impact of expected tourist expenditure on direct and indirect employment(mappisammeng 1991; Booth 1988). Varley 1978 considered that the volume of indirect employment generated by tourism was dependant on the degree of linkage between the tourism sector and the other sector in the economy. In his studies in Fiji he concluded that the higher degree of integration in the economy was the higher the amount of indirect employment creat ed. Further empirical studies have been done to illustrate the impact of tourism on national economy. Thus input-output analysis approach has been done to illustrate the economic impact of tourism. However Dwyer, Forsyth and Spurr argue that this type of models has some limitation and is considered as a disadvantage to use such type of model. They revealed that these models had taken into consideration only the positive economic aspect and has overlooked the negative impacts. Therefore they suggested that Computable general Equilibrium models (CGE) is a better technique to resolve the problem of the limitation.

Wednesday, September 4, 2019

Quality management of executive holloware

Quality management of executive holloware 1 Why is quality important to Executive Holloware? Quality is important to Executive Holloware because they are one of the UKs leading suppliers of top-quality holloware. They describe themselves as selling to a top end market. As a result their products are priced high. Executive Holloware say their most important product was a handmade silver-plated Georgian tea set priced at over  £400. It is implied that this is the most expensive product and thats why they thought it was the most important. This could be a misguided opinion. It could have been the companys trademark, the item which made the brand; in this case you could have called it the most important because without it, there was no brand. The entire product range was hand-made and it looks like this was a big part of Executive Hollowares brand image. Holloware is a term that refers to table service items such as sugar bowls, coffee pots, teapots and other metal items that go on a table. Holloware is traditionally constructed to last a long time. It is typically made with thicker walls and more layers of silver-plate than other silverware. [1] 2 What do you understand by the term quality? The ISO9000 system describes Quality as: The degree to which a set of inherent characteristics fulfils requirements[3] The American society for Quality describes Quality as: A subjective term for which each person has his or her own definition[4] In reality the definition of quality depends on your viewpoint. A customer may look at quality in terms of design, how the product performs, or whether it lasts as expected. A producer may look at quality in terms of conformance to requirements and the cost of quality i.e. scrap and profits. A government may see quality in terms of safety or environment. In industry, quality is often measured using values e.g. number of features, reliability, aesthetics etc. The majority of definitions seem to agree that regardless of your viewpoint, there is a set of requirements, whether it is conscious or sub-conscious, for which conformance is the goal. It is important to understand a range of peoples requirements both for a products customer base and within the company in design, manufacturing and other departments. 3 How would you specify quality for executive holloware? A quality product for Executive Holloware is a product that is free from: * Dimensional inaccuracies * Scratches * Bruises The product must be free from defects if a customer is to be proud of presenting it on their dinner table. Customers use the product to give their dinner tables a touch of class and give their guests the impression that no expense has been spared. In terms of the Georgian tea set, the product should be made of a layered silver-plate, other products are made from pewter or stainless steel. 4 What are the underlying causes of the problems at Executive Holloware? One of the main problems is that there is no dimensional / defect inspection carried out until the product is ready for shipment. Too many problems are getting ignored during the manufacturing processes and the product is getting passed down the line with defects. It appears that there is no quality control data generated during the processes until the end of the production line. For this company, the data would not have to be complex, just a numerical count of defects and possible reasons. There definitely seems to be a lack of control chart knowledge. The problems with defects are causing a massive amount of rework, which costs the company money as work is being done twice, this should be virtually unnecessary. The culture of the workforce is wrong. It appears that this stems from the top as the Production Director, Andrew Keegan, is constantly pressuring them to speed up production. This will not work if the quality is not under control. It will only multiply the problem or even increase the percentage of rework. It is a reactive culture with people only reacting to problems with the finished product. There seems to be a blame culture affecting the workforce too. Nobody wants to help with the root causes of the problem; they just want to blame somebody else. This could be because the workforce doesnt feel empowered to do anything about the quality problems. They cant stop production if they notice a problem because they will get blamed for a loss of production time. The workforce may be paid per item they get through their station. This is the case in so many industries of this kind. The problem with that is that the workforce is inclined to rush jobs because they know that if there is rework then they will get paid again. Another problem is that when a defect is found the workforce has no way of knowing if it is out of tolerance or not because there is no specification. There are no limits. 5 How should Executive Holloware measure quality at each stage of the process? Statistical Process Control should be used to take periodic samples from the processes and plot sample points on a control chart. It can then be determined whether the process is within limits. Variability is inherent in production processes and the aim is to lessen the variability to random causes. Three quality characteristics have been highlighted in section 3 which can be measured. A specification needs to be drawn up so that the workforce can decide which defects are failures and which are not. There needs to be a set of tolerances for problems like dimensional inaccuracies. The workforce also needs to be provided with measuring equipment to assist with this. A process control chart can be used as shown in Figure 5‑1. The process would be in control if no sample points lie outside the limits, most points are near the average, and there are an equal number of points above and below the centre line. A histogram can then be created to visually show which problems are most significant. A Pareto analysis could also be done to work out which problem is costing the most. Using control charts at each stage it will be possible to pinpoint at which stage defects are caused. A Fishbone diagram could then be used to show all the causes of a particular quality problem. All these visual aids are useful for meetings to aid effectively communicating the message to everybody present. Another approach to quality control is acceptance sampling. This can also be used on a random basis to measure the % defective. As the products are intended to be top quality and supplied to a top end market, this is not really suitable; especially with the large number of non-conforming products. 6 What steps would you advise Paul Stone to take to improve quality? The basic four steps from the Total Quality Management theory should be used: * Step 1: Collect and organize data * Step 2: Identify problematic components or maintenance processes * Step 3: Analyse data after maintenance process monitoring * Step 4: Action plan [5] The management should ask themselves the 5 Whys each time there is a problem with quality. The 5 Whys is a technique that doesnt involve advanced statistical tools, and in many cases can be completed without a data collection plan. By repeatedly asking the question Why at least five times, you can peel away the layers of symptoms which can lead to the root cause of a problem. [6] Paul should advise management to instil a new culture into the workforce. The workforce should be empowered to report problems and stop production if they feel there is a problem. They should also be involved with problem resolution because it has been proven that if a workforce feels more involved then they are more likely to use their process knowledge to come up with solutions for themselves. This would increase morale and is a basic TQM (Total Quality Management) philosophy. There could be daily meetings for each production unit to go through control chart data. There could then be monthly meetings for the entire staff which will make everyone feel involved and issues can be discussed between departments. Installing a continuous improvement mentality should be the goal. Quality control data as discussed in section 5 should be analysed and used to direct resources for improvement efforts. Specifications need to be created for each product stating tolerances for defects of different types and in different locations on the product. Appropriate metrics need to be identified so that problems can be measured against a standard. There could be cause for a pay restructuring so that workers are paid a fixed rate instead of per item. Bonuses could be introduced based on quality production targets as a different type of incentive. Andrew Keegan should be advised that if the efficiency of the process is increased, then this will bring an increase in productivity. Cycle time should also be increased because there will be fewer problems during processes and rework should be rare. The spare capacity introduced from the lack of rework could then be used to increase production and for new product development. It may be possible to reduce manpower which will lower costs and increase profitability. Increased production means increased turnover. One study by the University of Manchester states that success in applying the quality tools and techniques discussed relies on: * In-depth knowledge of the process * Formal training in problem solving techniques * Appropriateness of tools selected for use * Application of simple models at all levels in the organisation to aid communication and learning [7] If this is true then there needs to be formal training of statistical process control and problem solving techniques generally. There must also be involvement from all levels of the organisation. The Six Sigma theory can be used to help this organisation as well and can be applied to all stages of the problem solving process. The DMAIC (Define, Measure, Analyse, Improve, Control) methodology can be used. Six Sigma seeks to improve the quality of process outputs by identifying and removing the causes of defects and minimizing variability in manufacturing, which is exactly what this company needs to do. As quality assurance manager, Paul should take the lead role in this. The six sigma tools matrix (see Table 6‑1) can present a clear roadmap for the problem solver, especially if the problem solver is a novice (Black Belt or Green Belt). Six Sigma may be an appropriate strategy to base the work on but not in place of TQM because, as Dr Rick L. Edgeman from the University of Idaho said: Six Sigma is a highly structured, information-driven strategy for product, system and enterprise innovation and design. In contrast I would say that TQM seeks to satisfy customer needs continuously by providing what they desire at the lowest possible cost as a result of involving a critical mass of the organizations human resource. [8] Different aspects of both of these methodologies / strategies will be helpful for this company. The steps discussed in this section should have a positive effect on the shops as they will be more confident in the product they are selling, and the end users. Works Cited 1. Encyclopedia Britannica. Holloware Article. Encyclopedia Britannica Online. [Online] [Cited: 7 December 2009.] http://www.britannica.com/EBchecked/topic/269441/hollowware. 2. AtlanticHospitality.com. Holloware. Atlantic Hospitality. [Online] 2003. [Cited: 7 December 2009.] http://atlantichospitalityinc.com/images/on_halloware/EJAZZ.JPG. 3. International Organization for Standardization. Quality management systems Fundamentals and vocabulary. 2005. ISO 9000:2005. 4. American Society for Quality. ASQ Glossary Entry: Quality. 5. E. Vassilakis, G. Besseris. An application of TQM tools at a maintenance division of a large aerospace company. Journal of Quality in Maintenance Engineering. 2009, Vol. 15, 1. 6. EMS Consulting Group. Problem Solving. Lean Manufacturing Consulting and Training. [Online] 1 February 2006. [Cited: 7 December 2009.] http://www.emsstrategies.com/dd020106article.html. 7. Greatbanks, David R. Bamford and Richard W. The use of quality management tools and techniques: a study of application in everyday situations. International Journal of Quality Reliability Management. 2005, Vol. 22, 4. 8. Antony, Jiju. Six Sigma vs TQM: some perspectives from leading practitioners and academics. International Journal of Productivity and Performance Management. 2009, Vol. 58, 3. 9. Catherine Hagemeyer, John K. Gershenson, Dana M. Johnson. Classification and application of problem solving quality tools. The TQM Magazine. 2006, Vol. 18, 5.

Tuesday, September 3, 2019

Behavior Problems in Schools Due to Lack of Discipline Essay -- Educat

Parents and students seldom dispute the disciplinary actions of school authorities up until the late 1960s. Schools are a place considered to provide instruction, instill good value, and inspire the morals of our nation (Arum 60). The courts decided that it was important to give teachers and school administrators’ authority over student behavior. The authority initiated from the English common law concept of in loco parentis which means in place of the parent. This law allowed parents to give school personnel a given amount of control over their children when they place their children in school (Yell 8). This gave administrators and teachers the ability to guide, correct, and discipline in an orderly and effective learning environment while maintaining practical control of students as they do their job teaching. Loco parentis implies that teachers and administrators have a responsibility to see that school order is maintained by requiring students to obey reasonable rules and commands, ensure others rights are respected, and conduct themselves in a safe and orderly manner while at school (Yell 8). Students are supposed to know what behaviors are acceptable or forbidden. They need to be accountable if they refuse to comply with reasonable school rules by behaving in prohibited ways. Holding the students accountable, means the violators will be subject to disciplinary measures or consequences. As students civil rights revolution evolved, and the increase of these rights emerged, parents and students, began to question, undermine, and challenge school disciplinary practices in court with the help of lawyers in the public’s interest. The timeframe for drastic school discipline changes began around 1969. The Supreme Court ruled how... ..., Barry A. "School Discipline: â€Å"Is There a Crisis in Our Schools?" Australian Journal of Social Issues 35.1 (2000): 73-86. EBSCO MegaFILE. EBSCO. Web. 19 Nov. 2010. Jackson, Toby. "Getting Serious About School Discipline." Public Interest 133 (1998): 68+. Expanded Academic ASAP. Web. 19 Nov. 2010. Jost, Kenneth. "Student Rights." CQ Researcher 19.21 (2009): 501-524. CQ Researcher. Web. 21 Nov. 2010. Wintour, Patrick, and Nicholas Watt. "Gove promises to end 'no touch' rules for teachers: Government's 'new deal' in the classroom on eve of Tory conference.† The Guardian. 2 Oct. 2010. ProQuest Newsstand, ProQuest. Web. 19 Nov. 2010. Yell, Mitchell L., and Michael E. Rozalski. "The Impact of Legislation and Litigation on Discipline and Student Behavior in the Classroom." Preventing School Failure 52.3 (2008): 7-16. EBSCO MegaFILE. EBSCO. Web. 19 Nov. 2010.

Monday, September 2, 2019

oF MICE AND MEN :: essays research papers

Of Mice and Men is a novel of defeated hope and harsh reality of the American Dream. However, regardless of how much one may hope and strive to reach it, the American Dream does not always provide complete fulfillment. Of Mice and Men takes place in America during the Great Depression of the 1930’s. Formerly known as the land of opportunity and fortune, America had soon earned the label of being the complete opposite. It was during this time that many migrant workers moved their family west in search for the â€Å"American Dream.†   Ã‚  Ã‚  Ã‚  Ã‚  The American Dream; there are similarities that are in most people’s dreams regardless of when they lived or who they are. Most peoples dream includes being happy, healthy, and surrounded by loved ones. However, dreams often differ in the aspect that some people may want to work hard, be healthy and have great financial success, while others dream of living off the land they work on and doing enough work to survive, while still remaining healthy and happy.   Ã‚  Ã‚  Ã‚  Ã‚  Being the best of friends, George and Lennie are different in many aspects yet they both seem to share one common goal; to purchase a few acres of land they can call their own, â€Å"an’ live off the fatta the lan’† ( Steinbeck, pg. 14). Being able to own a humble home, where they can work for themselves and be free of the torment and scrutiny of society. A place away from all the ignorance of the outside world, where it seems Lennie was not meant to live.   Ã‚  Ã‚  Ã‚  Ã‚  George and Lennie’s struggle for their tiny piece of the American Dream is best summed up by Crooks when he said that he’s â€Å"seen hundreds of men come by on the road an’ on the ranches, with their bindles on their back an’ that same damn thing in their hands. Hundreds of them. They come, an’ they quit an’ go on; an’ every damn one of ‘em’s got a little piece of land in his head.

Operational Functions and the 4 P’s of Marketing

Lecture 1: Introduction to Marketing Marketing is the management process responsible for identifying, anticipating and satisfying customers† requirements profitability. Peter Drucker ‘there is only one valid definition of business purpose: to create a customer†. At its simplest, if you do not have any customers for the product or service your organization offers, then there is no reason for continuing existence. Consumption is the sole end and purpose of all production and the interests of the product ought to be attended to only so far as it may be necessary for promoting those of the customer. The operational functions of marketing: sales promotion, advertising, public relations, selling, financing, buying, forecasting, pricing, standardization, publicity, merchandising, market research, transporting, risk-taking, servicing and stockholding. Elements over which organizations have control and which are used to try to influence customers to choose one particular organization in preference to another are generally termed the marketing mix. External factors in the original marketing mix: customer-buying behavior, trade behavior, competitors† position and behavior, government regulations. Originally there are 12 P†s of marketing but this list is not easy to remember and it should be obvious why Jerome McCarthy condensed the 12 items in Borden†s original marketing mix, into 4 major categories popularized the ‘4 Ps†. The internal variables are therefore loosely grouped together under the headings of: product, price, place (the offer mix), and promotion (the promotional mix). While the ‘4 Ps† is a useful framework, a vigorous debate has taken place over the last decade about the dangers of seeing marketing solely as the control of the ‘4 Ps†. In fact it is a trap that tends to make suppliers forget the needs of customers as well as the importance of a mutually beneficial exchange. There is a suggestion of the addition of three other Ps: Probe (research), Partition (segmentation) and Position. Lecture 2. The Marketing Macro Environment. Both of the parties making an exchange are more likely to consider that the exchange has been beneficial when the exchange has been made within the context of what is known as an Open Market. This is a market which has all of the following characteristics: 1 Single homogeneous product, 2 Many buyers, 3 Many sellers, 4 Buyers and sellers have equal access to all available information relevant to the market. All developed societies have similar regulations to regulate legal trade. It is therefore usual for manufacturing and trading organizations to have to comply with such regulations, which effectively constitute one aspect of the environment in which an exchange takes place. These factors are for this reason referred to as the environmental variables of marketing. These are usually labeled the Economic, Social, Technological and Political variables (STEP). Companies should seek to demonstrate good corporate citizenship by upholding the letter and the spirit of the law, and generally behaving in a responsible and responsive manner. Some markets and trades have developed general voluntary codes of conduct and control, supported and monitored by a central membership body. Medicine for example has long been controlled by strict codes of professional behavior. Governments have developed a body of legislation and enforcement frameworks in respect of industry and trade. In particular, the following areas of control are of direct concern to business. 1. Legislation in respect of monopoly and competition standards. In the UK it†s done through the Office of Fair Trading and the Monopolies and Mergers Commission. As a full EC member, the UK is also subject to Community provisions in respect of issues: in particular Article 85 of the Treaty of Rome concerns practices hindering competition. 2. Measures to protect consumers, whether as groups, individuals, as users of certain products and services, or particularly as targets for business activities. Relevant legislation has included the Trade Descriptions Act 1973, the Consumer Credit Act 1974, etc. Number of these statutes introduced measures directly relating to marketing practices such as pricing claims, warranties, product quality, etc. The economic environment is a complex network of international, domestic and regional influences and dependencies that shape the market potential facing companies. Company performance itself will depend critically on the quality of preparation and decision making is brought to bear on this potential. The significance of the economic data is that over time they will indicate major economic developments of direct interest to marketers. Such ‘economy-watching† may enable the vigilant company to respond in time to scenarios such as following: 1.Recession. A downturn in economic activity of variable intensity. Usual indicators will be a fall or leveling in GNP, GDP, household income, etc. Rises will be recorded in measures such as stock, unemployment and company bankruptcies. 2.Recovery. The opposite of the above. Marketers in some sectors will benefit from an early upturn in sales. Major upturns in economic activity may result in ‘overheating† with higher costs and prices. 3.Inflation. Rising prices may be associated with buoyant conditions, demand growth and shortages. Economic policies are likely in future to be more directly influenced by multilateral agencies and agreements (UN) and the expansion of common market blocs such as the EC. Culture within any society id the complex of elements that reflect the society†s beliefs and values, preferences and behavioral norms. For marketer it is necessary to understand that culture will vary within and between societies, so those cultural norms may vary between countries, regions and culture groups. Factors, which distinguish a society, change very slowly, as they are the products of family upbringing, the education system, national history and political development, religion, etc. Environmental awareness is an interesting reflection of how society-wide concerns have delivered a powerful message to governments and business leaders. Technology is the touchstone of economic progress, a leading source of competitive advantage commercially and an indispensable part of everyday lifestyle for the modern consumer. To illustrate the competitive force wielded by technology, it is worth observing that many manufactures have been affected by technology developments remote from their own field. Major sectors of the metalworking industry were obsolete by the developments of digital electronics. Eg typewriters. Technological developments decrease the price of production. Technologies have also enabled an increase in the variety of products available to customers. The marketing environment comprises the playing field upon which competitive marketing takes place. Companies need to monitor and decide rational responses to changes in the environment in order to win their colors. There are three types of companies: those who make things happen; those who watch things happen; and those who wonder what happened. Lecture 3: Markets and Market Segmentation. 1.A market is an aggregate of people who as individuals or organizations have needs for products in a particular product class and who have the ability, willingness and the authority to pay. – Consumer – where purchasing is done by private or group of individuals. – Industrial – products and services are bought for one of 3 specific uses: 1- resale, 2- producing other products, 3- products used in general eg administration, computers. 3.Differentiated markets. – Consumer needs are not the same: – homogenous, differentiated. Undifferentiated market – all needs are the same 4.Criteria for effective segmentation – measurable, – economically variable. Geographic – geographic position on the globe. Demographic – basis for the collection of many government statistics and the standard system used by the media industry. Includes age, sex, family cycle, and socioeconomic segmentation.

Sunday, September 1, 2019

Compair and Contrast: Zombies vs. Teenagers

Danger: Zombies and Teenagers are Ahead Mindless and blood lusting bodies fill our streets. Dragging themselves around without purpose or progressive thoughts. One would think that they should close the doors and lock the windows. However its not just decaying zombies that I speak of, its our teens. The biggest difference is the plain fact that teenagers are alive and zombies are undead. While both teenagers and zombies are completely different looking on the outside, on the inside they are very similar. Both are dangerous when they roam in groups. They have no choice of who they are, but I would like to show you how to understand both of them by comparing them to each other. Even how to destroy them. Danger is something teenagers are always getting themselves into, and when zombies are around everything else is in danger as well. Danger can be described as being put in harms way or threatening harm to others. A teenager is dangerous to themselves and other teenagers. They are reckless and don't think before they act. Being reckless is a serious issue for teenagers because they think they are invincible. Believing nothing bad will happen to them. However because of this thought process, teenagers are the ones who get harmed, or in trouble more often then any other age group. The reason for this is because the people who watch out for them aren't around at the times when teens are making the important decisions, that hold weather they get good or bad consequences. As a child an adult is all ways there to hold their hand and watch their back. As an older adult after the college years, ones life has calmed down and the realization of mortality sinks in therefore they are more careful about what they do with there bodies and minds. Young adults and teens are new to a world full of wonders, they do much experimenting, to learn the cause and effect of the actions and decisions they make. For example a teenager is about to drive a car with many other teens in the vehicle. One teen turns the radio up and everyone is dancing in there seats, screaming and laughing. The driver is being put in a dangerous situation. With all the distractions, he could do serious damage to the car and everyone in it. Its true that sometimes the driver is fine and nothing bad happens but the situation is still dangerous because of the possibility of a harmful ending. Putting other people in danger is something that zombies do as well. Obviously zombies are dangerous to other people. They attack with no warning. They spread diseases, and don’t even have the thought process to care about who they are hurting. However what is not as obvious is that they are a danger to themselves. A zombie will walk right into danger without realizing they might die. The reason they don't realize this is because their is only one thing on their mind and that is BRAINS! A zombie will walk straight toward a crazy redneck with a shot gun and wont even flinch at a warning shot. A zombie with continue trying to eat a dog even after someone has chopped an arm or leg off of it. When a zombie wants something they will do anything to get it, and this puts themselves in a whole lot of danger. Similar to a zombie a teenager is dangerous to themselves and others, luckily this behavior of recklessness will change and they will mature as they get older. A zombie on the other hand will never be cured and most likely they will not live very long if they keep their recklessness up. Ever wonder why teens and zombies are never by themselves? Its because they want to protect themselves. Teens like to move in packs and the bigger the pack the better. They go to the movies in a group of three and they meet another group in line for popcorn and they have grown in size. Teens show up at the mall because they know that someone they know will be their. If a teen is somewhere public alone they could be mistaken as a loser, and that would be traumatic for their reputation. Therefore they always have at least four to five buddies with them. Just like teens zombies need to be with other zombies, however its not for the company. Zombies like to go in packs everywhere because if they outnumber people, then they are more likely to be successful at their initiative attack. They are considered much more dangerous when in groups larger then three. If one were to spot a zombie alone they would feel superior and have no problem taking them down. Therefore zombies travel in groups no less then one hundred-sixty-six other brain eating peers. Weather someone is a teenager or a zombie they really don’t have a choice on becoming what they are. Teenagers become teenagers through the lifecycle. Everyone wishes they could skip the hormonal, emotional, and awkward stage in their life, but they cant. Its part of being human. The reason teens are different then other age groups is the crazy thing that happen to their bodies. Which I wont go into because this is not a, â€Å"What is Happening To My Body† pamphlet. Everyone goes through being a teenager, but not everyone will be a zombie. However once someone is bitten they have no choice to becoming a zombie. Its a disease that travels through a violent contact. The only thing one can do to stop it is to not be bit, by fighting back. If you want to know how to destroy a zombie or even a teenager it is all very similar. Go for the brain. A teenagers mind is what keeps them going in life if you make them feel terrible, then they will be miserable. If one were to embarrass them or destroy their reputation then they will never be able to live it down and until their dying day they will have never forgotten about the day their life was destroyed. Harsh? However so is bashing a zombies scull. It is their mind that would need to take damage to be destroyed. This is also the same way zombies are killed. Destroy the brain. Even though zombies don't use their brains, their body is still dependent on it to be undead. the brain must be smashed or shot or in some way mutilated to make sure the zombie doesn't come back. Disconnecting the body from the head is not enough. The body will still wander around and the head will still try to bite. The mechanics of this biological phenomenon are not completely understood by scientist yet. However the important thing is that if you kill the brain then you kill the zombie. The mind is a powerful organ for zombies and teens, and if you can take it out then you will succeed in destroying teenagers and zombies. While teenagers and zombies are on different levels of status, they are surprisingly similar to each other in many ways. Being dangerous and stupid are things that are not very positive to their attributes. However they can outnumber any other group. What they must go through is difficult on both of them as well. A teenager goes through body changes and is very sensitive and can be taken down easily through hurtful words. A zombie goes through a disease where they body decays and every one is trying to kill them. It seems like they are on the same boat. I wouldn't want to meet either one in a dark alley.

Saturday, August 31, 2019

Reprocudtive Health Bill

Chelsea Samatra, Kenneth Ragus Samatra,Ragus 1 Ms. Daligcon Period 4 A Battery That Makes Cents Abstract Many coins in the pile will make the most electricity. If there are more coins in the pile, then the more electricity it can produce, because the more electrons you have, the more electricity you will get. Batteries are expensive, but you can make one for exactly 24 cents! In this experiment, you will make your own voltaic pile using pennies and nickels. In the data, we will see if the number of pennies and nickels will affect the number of voltage and current.Problem How many coins in the pile will make the most electricity? Hypothesis If there are more coins, then the more electricity it can produce, because the more electrons you have the more electricity you will get. Samatra, Ragus 2 Background/Research You might think that batteries are a modern invention, but batteries were one of the first ways of making electricity. Alessandro Volta discovered the first electric battery i n 1800. He made a giant stack of alternating layers of zinc, blotting paper soaked in salt water, and silver. This early design for a battery became known as the  voltaic pile.How does a voltaic pile make electricity? The key to electricity is the movement of  electrons. In a voltaic pile, electrons move from one metal to the other through the saltwater solution. The saltwater solution is called an  electrolyte, and it contains  ions  in solution from the dissolved salts. An ion is a group of atoms that carries a positive or negative electric charge. The ions react with the metals, causing an  electrochemical reaction, a special kind of chemical reaction that makes electrons. The two types of metals in a voltaic pile are called  electrodes.Since there are two kinds of metals, one metal reacts more strongly than the other, which leaves an electrical potential difference, also called voltage, between the two types of metals. One metal becomes positively charged, the posi tive electrode and the other becomes negatively charged, the negative electrode. This causes electrons to move, creating an electrical  current  which is measured in amperes, and then you have electricity! In addition, the formula for voltage is current times resistance or V = I*R, so the formula for current will be voltage divided by resistance or I = V/R.Samatra, Ragus 3 Vocabulary Words: * Electrochemical Reaction – branch of chemistry that deals with the chemical action of electricity and the production of electricity by chemical reactions * Electron – Also called negatron, an elementary particle that is a fundamental constituent of matter * Voltaic Pile – battery consisting of voltaic cells arranged in series; the earliest electric battery devised by Volta. * Electrolyte – a liquid or gel that contains ions and can be decomposed by electrolysis. Materials The materials and equipments that are needed for the experiment are: * Pennies (4) Nickels ( 4) * Mild dish soap * Vinegar (any kind, 1/4 C. ) * Salt (1 Tbsp. ) * Small bow * Small plate (ceramic, plastic, or Styrofoam not paper or metal) * Digital multimeter (any kind that reads mA and mV) Samatra, Ragus 4 * Paper towels (2) * Scissors The procedures for the experiment are: 1. In a small bowl, mix together 1/4 C. of vinegar (electrolyte) and 1 Tbsp. of salt (ions). 2. Using scissors, cut up a paper towel into small squares. 3. Place the small squares to soak in the bowl of salt-vinegar solution, and set them aside. 4.Gather some pennies and nickels, wash with a mild detergent (like dish soap), and dry. 5. Start building your stack on a dry paper towel on your plate. Put down a penny first, then place a square of vinegar-soaked paper towel on top, and then add a nickel. Keep repeating the layers until you have a stack of four coins (alternating pennies, wet paper towel pieces, and nickels), making sure you end with a nickel on top. 6. Attach the leads of the multimeter to t he two ends of the battery by touching one lead to the penny on the bottom and the other to the nickel on the top.Measure the voltage produced by your battery (in millivolts, mV). You can also measure the current produced (in milliamps, mA). Samatra, Ragus 5 7. Repeat the experiment, each time building a battery with a different number of coins. One important rule is to always start with a penny and end in a nickel, so the number of layers of pennies and nickels will always match. The record of the data table: Number of Pennies| Number of Nickels| Voltage (mV)| Current (mA)| 4| 4| 6. 8| 1. 7| 5| 5| 9. 5| 1. 9| 6| 6| 12. 6| 2. 1|The data above shows that number of coins in the pile had affected the amount of electricity produced. The viewer can obviously tell that, why? Because the data shows that the more pennies and nickels you have in yorur pile, the more amount of electricity you can produced. The amount of electricity produced on 4 pennies and nickels is 6. 8, why because the re sistance was 4 and then the current was 1. 7 and the formula for voltage is V=I*R . The amount of voltage in 5 pennies and nickels is 9. 5 and its current was 1. 9. The amount of voltage in 6 pennies and nickels is 12. and its current was 2. 1. Samatra, Ragus 6 Sample Models This image shows the structure of a voltaic pile, which is the first design of a battery that's used to make electricity. It was discovered by Alessandro Volta in 1800. In this experiment, you will make your own version of the voltaic pile using two different types of coins and a salt-vinegar solution. How does a voltaic pile made of money work? Since each coin is made up of a different metal, one metal reacts more strongly than the other, which leaves an electrical potential difference (voltage) between the two types of metals.The question is, how will different numbers of coins affect the amount of electricity produced? By making piles with different numbers of coins and measuring the voltage and current produ ced, you can test the effect of changing the number of coins in the piles. Samatra, Ragus 7 Analysis Amount of the Voltage (Pennies ; Nickels) 30 25 20 15 10 5 0 (4 pennies ; nickels) (5 pennies ; nickels) (6 pennies and nickels) The graphs shows that the number of pennies and nickels whether it increase or decrease, it will affect the amount of the voltage (mV).The graph above specifically shows and tell us that increasing the number of nickels and pennies will increase the amount of voltage. In a very short way, the more pennies and nickels the more voltage and current. The formula for voltage was V = I * R, so the formula for current was I = V/R and then the formula for resistance was R = V/I. Samatra, Ragus 8 Conclusion In conclusion, many coins in the pile will make the most electricity, i proved that my hypothesis was right the more coins in the pile, then the more electricity it can produce, because the more electrons you have, the more electricity you will get.The data that I made was connected to the research section because the research section, it tells the reader that can the number of pennies and nickels will affect the amount of the voltage? So my data shows that the number of the pennies and nickels did really affect the amount of the voltage. I will always remember that the more electrons/coins in the pile, the more electricity/voltage it can produced.